Thermal Performance and Pipe Encapsulation
Hydronic underfloor heating efficiency relies on heat transfer from warm water pipes into the floor screed mass. Traditional semi-dry sand-cement screed is hand-trowelled and compacted manually, leaving microscopic air pockets around pipes that act as thermal insulators.
Pumped liquid screed flows fluidly around underfloor heating pipes, achieving 100% surface contact. Combined with higher thermal conductivity, liquid screeds respond faster to thermostat calls and run efficiently at lower heat pump water flow temperatures.
| Metric | Liquid Anhydrite Flow Screed | Traditional Sand & Cement (1:4) | Fast-Drying Polymer Screed |
| Minimum Thickness over Pipes | 30mm (45mm total depth) | 50mm (65mm-75mm total depth) | 35mm (50mm total depth) |
| Thermal Conductivity | 2.0 - 2.2 W/mK | 1.1 - 1.2 W/mK | 1.4 - 1.6 W/mK |
| Foot Traffic | 24 to 48 Hours | 3 to 5 Days | 12 to 24 Hours |
| Trowelled Falls Possible? | No (self-levelling) | Yes (ideal for wet room falls) | Yes (ideal for slopes) |
- Thermal conductivity: 2.0 W/mK (liquid) versus 1.1 W/mK (sand-cement).
- Depth requirements: 45mm total depth (30mm cover over pipe) saves valuable room height.
- Pour speed: A complete 100m² extension floor is pumped in under three hours.
- Surface tolerance: Achieves self-levelling SR2 surface regularity standards.
Drying Times and Laitance Sanding
A critical difference between screed systems is curing and drying behaviour. Liquid anhydrite screeds allow light foot traffic after 24 to 48 hours, but require 1 day per millimetre of depth to dry fully under natural ventilation (approximately 45 days for a 45mm slab).
As anhydrite screed cures, a fine powdery crust of weak calcium sulphate (laitance) rises to the surface. Professional flooring contractors must mechanically sand off this laitance layer 7 to 10 days after pouring to ensure tile adhesives bond securely.
When Traditional Sand and Cement Screed is Preferred
Traditional 1:4 sand and cement screed remains the preferred option for wet rooms, external thresholds, or projects where falls to floor gullies are required. Liquid screeds are self-levelling and cannot maintain a sloped fall.
By blending polymer fast-drying additives into traditional sand-cement mixes, drying times can be compressed to under 14 days, allowing fast porcelain tile installation.